If you’re like most people, you probably reset your iPhone 5S at least once a year. But if you don’t have a computer nearby, or if resetting your iPhone 5S is too difficult or time-consuming, here’s a guide on how to do it without one.
- Open the Settings app and scroll down to the bottom of the screen.
- Tap on General and then Reset Apple Device.
- Enter your Apple ID and password (if any).
- Tap on Reset button.
- Your iPhone 5S will be reset and will start up with the new settings as if it were brand new!
To perform a factory reset on your iPhone, you will need a computer. But if you have a Mac, you can use a powerful tool called EaseUS MobiUnlock to perform a factory reset on your iPhone. Once you’ve completed the process, your iPhone will restart and be as if it were brand new. Although it’s not recommended, it’s still possible to restore your iPhone without a computer.
If your iPhone is locked with a passcode, you’ll need a computer to unlock it. iTunes can download the correct firmware for your iPhone and syncs with your computer. If your computer is a PC, you’ll need iTunes. It will need to be downloaded before you can perform the process. Once you’ve downloaded the necessary software, you can follow the instructions. Once you’ve completed the process, you should have a password-free iPhone.
How Do I Factory Reset My iPhone 5S With Buttons?
If you are wondering how to factory reset your iPhone, then the answer is to use buttons. You can do this by pressing and holding the power and side buttons until the Apple logo appears. Once you’ve done this, you will see the Apple logo and the screen will reboot. Once the device has finished rebooting, you can restart it again. If you have problems with the device, or if the physical button is not working, you can perform a hard reset.
How Do I Factory Reset My iPhone 5S With Buttons?How Do I Force My iPhone To Factory Reset?How Do I Completely Reset My iPhone 5S?How Do You Force Restart An iPhone 5S?Is There Another Way To Reset An iPhone?How Can I Get Into A Locked iPhone?Can You Hard Reset An iPhone With Buttons?
Using your Mac, connect your iPhone to your computer. Then, hold down the Home and Sleep/Wake buttons at the same time. After the screen goes black, release the buttons. Your device should now boot into recovery mode. Once the process has completed, you can use iTunes or iCloud to restore your data to the device. But before you start, be sure to back up all your data.
How Do I Force My iPhone To Factory Reset?
If you want to restore the factory settings of your iPhone but can’t open the Settings menu, there are ways to perform a factory reset. Before doing this, make sure that you have a backup of your phone. This way, you can restore your data and settings if something goes wrong. Just remember to have a back-up of your phone handy to avoid losing important data. You can also force your iPhone to factory reset without a computer by following the steps below.
To start with, you need a computer. If you do not have one, you can borrow a friend’s computer. Then, you’ll need to have a working iPhone and a trusted account with iCloud. If you don’t have a computer, you can always contact Apple for help recovering your account. Once you have this, you can use the EaseUS MobiUnlock to force your iPhone to factory reset without computer.
How Do I Completely Reset My iPhone 5S?
Before you can start the process of resetting your iPhone, you will need to connect it to your computer. To do this, you must connect your iPhone to your Mac using its USB cable. Once connected, the Finder will open up. From the sidebar, click “Reset iPhone.” Once prompted, tap “Yes” to confirm the process. Once the process is complete, you will see the message “The iPhone has been reset.”
You will then be given a choice of three methods to perform the reset. You can either choose to perform a soft or hard reset or use the alternate master reset. You can also simply power cycle the iPhone. However, it is important to note that the method of hard reset wipes all content and settings from the device. Therefore, you will need to back up important data and remove the SIM card to avoid losing any of it.
Once you have your iCloud account password, use the AnyUnlock software to remove the screen passcode. This software will also erase all existing data on your iPhone. Then, download the latest iOS firmware. You must have a computer to successfully reset your iPhone. However, if you don’t have one, it’s ok to borrow a friend’s computer. Either way, the process is simple and completely free.
How Do You Force Restart An iPhone 5S?
If you’ve had a problem with your iPhone, you may want to know how to force restart an iPhone 5S without a computer. A force restart is much simpler than a hard reset, and requires no tools. All you need to do is hold down the power and side buttons on your device for about ten seconds until the Apple logo appears. After that, connect your iPhone to a computer and go to its recovery mode. From there, you can find the device and select the option to restore. When the process is complete, you’ll be able to set up your iPhone.
If your iPhone is unresponsive or is refusing to turn on, the best way to fix the problem is to perform a forced restart. This method will cause the device to shut off and then restart without losing any data. It also means that you’ll have a clean slate, so you can restore your data. If you can’t find a solution that works, consider restoring your iPhone with iTunes.
Is There Another Way To Reset An iPhone?
There are many reasons to perform an iPhone hard reset. In many cases, freezing or malfunctioning functions are the reason. Resetting your phone will restore its factory settings and allow you to recover from a backup or set up a brand new device. But before you can do this, you must have the device unlocked and connected to a computer. This method is simple and will restore the factory settings without losing your important data.
To enter recovery mode on an iPhone, first shut down the device. Close the Finder or iTunes app. If you have an older model of the phone, you can use the same method. Press the side/top button and hold it for about 30 seconds. The same process is applicable for iPhone 7s and iPhone 6s models. After you have completed the steps, you can now turn off your device and restore it to factory settings.
How Can I Get Into A Locked iPhone?
If you’re wondering how to get into a locked iPhone without a computer, you’re in luck. There are several ways to do this. You can use iTunes, but you’ll need to enter the passcode first. Make sure your iPhone is in recovery mode first. You must be connected to a computer via a USB cable. Once it’s in recovery mode, you can remove the passcode and set a new one.
Another way to unlock a locked iPhone without a computer is by calling Siri. Using this method, you can unlock an iPhone without a computer, as long as you have the Apple ID. This method is only available on iOS devices running iOS 8.0 or higher. It doesn’t always work, though. It’s best to try this method with another method if you’ve been unsuccessful. Then, use the iTunes backup to restore the device.
After confirming that the device you’re trying to unlock has a software lock, you can start the unlocking process. To do this, you need to ensure that the device’s Find My iPhone feature is turned off. Next, you’ll need to download the correct firmware package to your computer. Click on “Restore” and wait for a few moments. Your iPhone will now be restored and displayed on the Hello interface.
Can You Hard Reset An iPhone With Buttons?
Before attempting to hard reset your iPhone, make sure it is connected to a computer. If the device is locked, you will need to get into the recovery mode. You can do this by booting the device into DFU mode (Device Firmware Upgrade). While the iPhone is in this mode, you need to hold down the Sleep/Wake button and Home button at the same time. Release the buttons when the screen turns black.
First, open iTunes or Finder. Mac OS X users can open Finder by clicking on the two-toned face in the Dock. Windows users can open iTunes from the Start menu or older versions of macOS from the Applications folder. Then, hold down the Volume Up or Volume Down button until the iPhone enters recovery mode. After the device restarts, you should see the message “The iPhone is not working properly.”
If the problem is with Face ID or a password, you can try to reset your iPhone using the computer. If you want to use iTunes, you need to unlock the device first. This way, you can access your phone’s settings without using iTunes. Alternatively, you can use the Apple software, which is free. To unlock your iPhone, download iTunes from the Apple website. It will give you the password for the iPhone you’ve been trying to unlock.
